Alpine BBX-F1200 - 4 Channel Amplifier 600w
BBX-F1200
Specifications
| Brand | ALPINE |
| Code | BBX-F1200 |
| Condition | New |
| MPN | BBX-F1200 |
Description
This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. High Power, Great Value
This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. High Pass and Low Pass Filters
These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency.
Bass EQ for Best Bass
Performance With Bass EQ, you can maximise the performance of your system and get even more powerful bass.
FEATURES Install
Terminal Layout: Two-Sided Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
General
Amplifier Type: Class-A/B Channel Design: 4/3/2 Channel Thermal Control: Thermal Management Control Power Supply: DC-DC PWM Power Supply Power Supply Design: MOSFET Power Current Protection: Over-Current, Over-Voltage and Thermal Protection Crossover: Variable Low-Pass / High-Pass Green/red status LED 2 pair RCA pre-inputs
SPECIFICATIONS
Max Power Output Ratings Total Max Power: 600W
RMS Power Ratings
Per Channel into 4ohms (≤1%THD+N): 4 x 50W Per Channel into 2ohms (≤1%THD+N): 4 x 70W Bridged into 4ohms (≤1%THD+N): 2 x 130W
Sound Tuning
Crossover Frequency (Variable, OFF/LPF/HPF Selectable) 1/2 Ch: LP/HP: 50Hz – 500Hz 3/4 Ch: LP/HP: 50Hz – 500Hz EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB (3/4 Ch only)
Dimensions
Footprint: 330 mm x 52 mm x 240 mm
General
Power Requirements: 14.4 V DC (11 V to 16 V) Input Sensitivity: 0.2 - 8.0 V Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Speaker Impedance: 4 or 2 Ω Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB Weight: 2.7 Kg
This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. High Pass and Low Pass Filters
These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency.
Bass EQ for Best Bass
Performance With Bass EQ, you can maximise the performance of your system and get even more powerful bass.
FEATURES Install
Terminal Layout: Two-Sided Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
General
Amplifier Type: Class-A/B Channel Design: 4/3/2 Channel Thermal Control: Thermal Management Control Power Supply: DC-DC PWM Power Supply Power Supply Design: MOSFET Power Current Protection: Over-Current, Over-Voltage and Thermal Protection Crossover: Variable Low-Pass / High-Pass Green/red status LED 2 pair RCA pre-inputs
SPECIFICATIONS
Max Power Output Ratings Total Max Power: 600W
RMS Power Ratings
Per Channel into 4ohms (≤1%THD+N): 4 x 50W Per Channel into 2ohms (≤1%THD+N): 4 x 70W Bridged into 4ohms (≤1%THD+N): 2 x 130W
Sound Tuning
Crossover Frequency (Variable, OFF/LPF/HPF Selectable) 1/2 Ch: LP/HP: 50Hz – 500Hz 3/4 Ch: LP/HP: 50Hz – 500Hz EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB (3/4 Ch only)
Dimensions
Footprint: 330 mm x 52 mm x 240 mm
General
Power Requirements: 14.4 V DC (11 V to 16 V) Input Sensitivity: 0.2 - 8.0 V Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Speaker Impedance: 4 or 2 Ω Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB Weight: 2.7 Kg